Відео

Great items. Do you know anyone who does the same thing for older Bosch 440s? Good stuff

Good information. Thanks. I was working on soffitts and could not get a corner angle right.

Genius. Simple, and effective. Exactly what a good design/solution should be. Literally going to my garage today to make these. Thanks!

Clever, TY

Nice ❤❤❤

Thank you Sir

One of the most nit picking and biased reviews I've seen in a long time! Always looking for an issue where in reality, none exists if the user uses a slightly different technique. . I make no wonder that he doesn't state prices as the Woodpeckers is 4 times the cost of the Drillpro. Clearly a sales pitch for the overpriced US version.

First I appreciate that on your channel you get right to it! None of this crap of talking stuff as filler, shut up tell me what you want to share nd move on, AND THAT IS EXACTLY WHAT YOU DO! Thank you

That is absolutely beautiful. Nice work!

Installed some shosugiban in my bathroom as a feature wall... needed trim to match, so I made it . Turned out awesome. I now offer it as a feature in high end remodel projects (labour intensive).Helpful tips here, and this is probably the most important step regarding the overall look

Wow that blade height trick is just what I needed thanks !!!!

I will never be comfortable with crosscutting on a table saw.

For a total from scratch builder these types of sized pieces are perfect for model plane and boat builders. Stringers galore at your fingertips!

Pertama kali lihat miter gauge dipakai terbalik.😮

Very nice tip, thank you! The board sticks out quite a lot over the table edge, but it does not seem to matter much with this method - what would you say is the maximum safe width here?

A good cabinetmaker can do great work with mediocre tools. But he or she will do it faster and have more fun and less frustration with high quality tools.

Great work!!! I have a DWS 715. Will one of these kits work on it?

Great video. Thank you for posting. Have you, or have you seen people paint their garage floors by section? I have a lot of crap to move

Best box joint jig I've seen on UA-cam hands down !!!!! Your patience and attention to every detail was extremely helpful. I just got done building this jig and it works flawlessly. Thanks so much and "KEEP INSPIRING!!!

Amazing, again you make it look so easy, thanks I've been through this issue before. Now I know the straight forward way to have good result.

Rite tool fir the jov

Can the same thing be accomplished with a track saw?

Brilliant. I did this as a roofer 30 odd years ago. Ah .now i remember 😅😅😅 Thanks thats a great tip.

A recent issue I am having is with material thickness of hardwood bought at the big box stores. As I buy a stack of poplar for example thickness of all the boards does not match and I have to thickness plane down to the dimension of the thinnest board. If I don’t do this these clamps touch the thickest board and not the thinnest so the glue up is unacceptable.

Simple, but brilliant in it's simplicity. Thanks for sharing.

Yep, I want to purchase MORE STUFF

Maybe you should rename this “Marking knives ALWAYS prevent joinery gaps… when used correctly.” The first 2/3rds of the video I was thinking “why is he using the knife wrong?”; only in the last third when you did correctly position the bevel on the waste side did the penny drop. However; I feel this is aimed at the very small percentage of woodworkers who can’t fathom the concept of putting the bevel on the waste side. The only reason I even clicked on this video was because of the title; my initial thoughts were “WTF is this crap? Knife lines will ALWAYS be accurate…” because I know how to use one. At the end of the videos you almost show how to do it properly… pro tip put wood against square, remove wood and mark against square blade. Replace wood, move square to other side, remove wood, mark against square blade. This would have been better approached from the other perspective; FIRST show how to mark out with a knife properly and then show why you DON’T just knife both sides of the wood. Incidentally I am a hand tool woodworker; I knife my lines and cut to them accurately using planes and/or chisels. Machine tools are just for roughing out so pencil lines are good enough for that.

When you were a child at school, you learnt how to count - 1, 2, 3, 4, etc. Simple, easy, no fractions, precise. That is what a metric tape measure is....1, 2, 3, 4...

Love your explanations. So logical. Not many know you are around. Master craftsman. Thanks a million

Thanks so much. A light burn for me is so pretty but you explained so well. Look forward to seeing you brush out and colour. Great teacher.

So I'd need a big fat shim if i buy a dado?

I have been debating buying a router table but now I'm going to build this!!! I don't have a full time use for a table but wanted want for ease of routing and the results. This is awesome!! Thanks for what you produce!!!!!

Used it today and it worked perfectly! Thank you!

will be making these tomorrow. vertical storage of f clamps like this just makes more sense for my insanely tiny shop space.

nice commercial

With tape u just dont see gaps so easily, does not mean they are not there lol

A lot more precise than the similar method of marking both pieces and cutting. At least if there is a slight mistake in this more detailed version, the second cut will still match as the first cut is used as a fence.

Not gunna lie. Wish you atill had plans for this

The only good way I found to remove carpet glue from concrete. The solvents don't do a very good job. It's very dusty, but works

Very cool, and new to me, after who knows how many thousand of woodworking videos I've seen over the past couple of decades. It strikes me that even with my jointer, this would be great for putting a straight edge back on plywood, because you can't really run layered stuff like that on a jointer safely.

Bravo

No nonsense, I love it! You earned yourself a subscriber.

This trick is telling me to make mobile my table saw setup. My saw has the capacity, just not the room wall to walk.

Clickbait never ends.

Brilliant!

Hi! I learned how to do this style of wood burning from you a while ago on another profile I had but I remembered you so I had a question. I've been doing the inspired sho sugi ban burn for a few months. But so I engrave names into my wood before I torch it right. But I was wondering if there was a way to not burn the engraved part when I'm torching the wood around it? Like maybe some type of lotion or something I can put on the engraved part to keep it from burning so I don't have to go back over it with my router after I burn it?

Hey bro is everything ok with u ? In my eyes u have some of the most creative, yet simply explained projects n tips. Hope u r well n look forward to watching a new video soon

Geeeeeeeeenius.. 🫡

This video sucks for those who don't have eagle eye like the rest of you. Plus if you have a trim piece that goes inside a window it's not gonna fit inside until you cut it so this crap doesn't work for that either. Try again. Dislike